A-Z Index | Phone Book | Careers

Berkeley Lab Team Wins Special ACM Gordon Bell Prize for Algorithm Innovation

November 24, 2008

Contact: Jon Bashor (510) 486-5849,  JBashor@lbl.gov

AUSTIN, Texas — A team of scientists from the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) has won a prestigious Gordon Bell Prize, sponsored by the Association for Computing Machinery (ACM), for special achievement in high performance computing for their research into the energy harnessing potential of nanostructures. Their method, which was used to predict the efficiency of a new solar cell material, achieved impressive performance and scalability.

The ACM Gordon Bell Prize annually recognizes the best performance of scientific applications on supercomputers. This year’s prize, presented in a special category for algorithm innovation, was announced Thursday, Nov. 20, at the awards session of the SC08 conference in Austin.

A test run of LS3DF, which took one hour on 17,000 processors of Franklin, perfo

A test run of LS3DF, which took one hour on 17,000 processors of Franklin, performed electronic structure calculations for a 3500-atom ZnTeO alloy. Isosurface plots (yellow) show the electron wavefunction squares for the bottom of the conduction band (left) and the top of the oxygen-induced band (right). The small grey dots are Zn atoms, the blue dots are Te atoms, and the red dots are oxygen atoms.

The Berkeley Lab researchers used three of the most advanced scientific computing facilities of the Department of Energy (DOE) Office of Science for this award-winning work: the National Energy Research Scientific Computing Center (NERSC) at Berkeley Lab, the Argonne Leadership Computing Facilities (ALCF) at Argonne National Laboratory, and the National Center for Computational Sciences (NCCS) at Oak Ridge National Laboratory. Their study was titled “Linearly Scaling 3D Fragment Method for Large-Scale Electronic Structure Calculations.”

Nanostructures, tiny materials 100,000 times finer than a human hair, may hold the key to energy independence. Scientists believe that a fundamental understanding of nanostructure behaviors and properties could provide solutions for curbing our dependence on petroleum, coal and other fossil fuels.

To better understand and demonstrate the potential of nanostructures, the Berkeley Lab researchers simulated their behavior through development of the Linearly Scaling Three Dimensional Fragment (LS3DF) method. These computer algorithms use a novel “divide-and-conquer” technique to efficiently gain insights into how nanostructures function in systems with 10,000 or more atoms.
 
The LS3DF team consisted of Berkeley Lab’s Lin-Wang Wang, Byounghak Lee, Hongzhang Shan, Zhengji Zhao, Juan Meza, Erich Strohmaier and David Bailey, with an aggregate of materials scientists, mathematicians and computer scientists contributing their own special expertise to solve this problem.  

The LS3DF application ultimately achieved a speed of 442 teraflop/s (442 trillion calculations per second) on a Cray XT5 system with 147,146 cores at the NCCS. The Berkeley Lab researchers were also able to run the code on the IBM BlueGene/P system at Argonne, reaching 224 teraflop/s on 163,840 cores, or 40.5 percent of the system’s peak performance capability.

The team first ran the LS3DF application on 36,864 cores of the Cray XT4 (Franklin) at NERSC, achieving 135 Tflop/s. These initial results at NERSC provided the key scientific insights from the application.

“By incorporating the correct chemical formulas into efficient computer programs, scientists can learn a lot about the structures and properties of molecules and solids,” said Lin-Wang Wang, a computational material scientist who led the Berkeley Lab team. “I like to think of computers as chemistry’s third pillar. In most cases, computer simulations complement information obtained by chemical experiments, but in some cases they can also predict unobserved phenomena.”

A science run using LS3DF, which took one hour on 17,280 cores of the NERSC Franklin system, computed the electronic structure of a 3,500-atom ZnTeO alloy. This run verified that the code could be used to compute properties of the ZnTeO alloy that previously had been experimentally observed. The simulation led to a prediction for the efficiency of this alloy as a new solar cell material.

LS3DF offers a more efficient way for calculating energy potential because it is based on the observation that the total energy of a large nanostructure system can be broken down into small pieces, and each piece can be calculated separately. More traditional methods calculate the entire structure as a whole system and are much more time consuming and resource intensive. Because LS3DF scales almost perfectly with the number of compute cores, it is the first electronic structure code that runs efficiently on computer systems with tens to hundreds of thousands of cores.

“We are excited by the results we are seeing,” said LS3DF team member Meza, who heads Berkeley Lab’s High Performance Computing Research Department. “The efficiency of LS3DF on these large computer systems is impressive, but the real story is the power of algorithms. Using a linear scaling algorithm, we can now study systems that would otherwise take over 1,000 times longer on even the biggest machines today. Instead of hours, we would be talking about months of computer time for a single study.”

Getting codes to run with such high efficiencies on massively parallel machines is not a trivial task. Bailey, Shan and Strohmaier of the DOE Office of Science’s Scientific Discovery through Advanced Computing (SciDAC) Performance Engineering Research Institute (PERI) worked hand-in-hand with Wang and his colleagues to analyze the performance of LS3DF and to identify potential performance improvements. Responding to this analysis, Berkeley Lab researchers assisted with a major revision of the code, which led to the prize-winning submission.

“The computational power we have is staggering, and it is important to make sure that each research project can effectively harness the power of Argonne’s Intrepid and optimize their calculations,” said Katherine Riley, the ALCF computational scientist who worked with the Berkeley Lab team. “Not only can we drastically reduce the time it takes to generate results, we can help scientists ask different questions and develop new insights in order to accelerate breakthroughs.” Once the LS3DF code had been optimized, it was a matter of days before it was running at each of the DOE supercomputing facilities.

Oak Ridge National Laboratory invited Wang and other Gordon Bell finalists to carry out runs on ORNL’s leadership Cray supercomputer, Jaguar. In Wang’s case, the winning simulation was achieved after only two runs over a two-day period, demonstrating the ease of porting and running high-performance applications on the Cray XT architecture. The project had previously been awarded time on Jaguar under DOE’s Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program.

“We still don’t quite understand how the electron moves around in a nanostructure, and how such properties depend on the size, geometry, composition and surface passivations,” said Wang. “Understanding this dependence will allow us to design nanostructures for desired applications. Using our improved LS3DF method will help us to understand and predict these properties.”

The ALCF, NCCS and NERSC are funded by the Office of Advanced Scientific Computing Research in the DOE Office of Science, providing some of the world’s most powerful computing resources and support to thousands of researchers around the country.

Berkeley Lab is a U.S. Department of Energy national laboratory located in Berkeley, California. It conducts unclassified scientific research and is managed by the University of California. Visit our website at www.lbl.gov.


About Computing Sciences at Berkeley Lab

The Lawrence Berkeley National Laboratory (Berkeley Lab) Computing Sciences organization provides the computing and networking resources and expertise critical to advancing the Department of Energy's research missions: developing new energy sources, improving energy efficiency, developing new materials and increasing our understanding of ourselves, our world and our universe.

ESnet, the Energy Sciences Network, provides the high-bandwidth, reliable connections that link scientists at 40 DOE research sites to each other and to experimental facilities and supercomputing centers around the country. The National Energy Research Scientific Computing Center (NERSC) powers the discoveries of 6,000 scientists at national laboratories and universities, including those at Berkeley Lab's Computational Research Division (CRD). CRD conducts research and development in mathematical modeling and simulation, algorithm design, data storage, management and analysis, computer system architecture and high-performance software implementation. NERSC and ESnet are DOE Office of Science User Facilities.

Lawrence Berkeley National Laboratory addresses the world's most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab's scientific expertise has been recognized with 13 Nobel prizes. The University of California manages Berkeley Lab for the DOE’s Office of Science.

DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.