A-Z Index | Phone Book | Careers

World’s Most Sensitive Dark Matter Detector Gets an Upgrade

Berkeley Lab, NERSC Help LUX Experiment Gain Ground in Search for WIMPS

December 15, 2015

Contact: Glenn Roberts Jr., geroberts@lbl.gov, 510-486-5582

LUX detector

A view inside the LUX detector. Image: Matthew Kapust, Sanford Underground Research Facility

The Large Underground Xenon (LUX) dark matter experiment, which operates nearly a mile underground at the Sanford Underground Research Facility (SURF) in the Black Hills of South Dakota, has already proven itself to be the most sensitive detector in the hunt for dark matter, the unseen stuff believed to account for most of the matter in the universe. Now, a new set of calibration techniques employed by LUX scientists has again dramatically improved the detector’s sensitivity.

Researchers with LUX are looking for WIMPs, or weakly interacting massive particles, which are among the leading candidates for dark matter. “We have improved the sensitivity of LUX by more than a factor of 20 for low-mass dark matter particles, significantly enhancing our ability to look for WIMPs,” said Rick Gaitskell, professor of physics at Brown University and co-spokesperson for the LUX experiment. “It is vital that we continue to push the capabilities of our detector in the search for the elusive dark matter particles.”

LUX improvements, coupled to advanced computer simulations at Berkeley Lab's National Energy Research Scientific Computing Center (NERSC) and Brown University’s Center for Computation and Visualization (CCV), have allowed scientists to test additional particle models of dark matter that now can be excluded from the search. NERSC also stores large volumes of LUX data—measured in trillions of bytes, or terabytes—and Berkeley Lab has a growing role in the LUX collaboration.

Scientists are confident that dark matter exists because the effects of its gravity can be seen in the rotation of galaxies and in the way light bends as it travels through the universe. Because WIMPs are thought to interact with other matter only on very rare occasions, they have yet to be detected directly.

“We have looked for dark matter particles during the experiment’s first three-month run, but are exploiting new calibration techniques better pinning down how they would appear to our detector,” said Alastair Currie of Imperial College London, a LUX researcher.

“These calibrations have deepened our understanding of the response of xenon to dark matter, and to backgrounds. This allows us to search, with improved confidence, for particles that we hadn’t previously known would be visible to LUX.”

The new research is described in a paper submitted to Physical Review Letters. The work reexamines data collected during LUX’s first three-month run in 2013 and helps to rule out the possibility of dark matter detections at low-mass ranges where other experiments had previously reported potential detections.

Exquisite Sensitivity

LUX consists of one-third ton of liquid xenon surrounded with sensitive light detectors. It is designed to identify the very rare occasions when a dark matter particle collides with a xenon atom inside the detector. When a collision happens, a xenon atom will recoil and emit a tiny flash of light, which is detected by LUX’s light sensors. The detector’s location at Sanford Lab beneath a mile of rock helps to shield it from cosmic rays and other radiation that would interfere with a dark matter signal.

So far LUX hasn’t detected a dark matter signal, but its exquisite sensitivity has allowed scientists to all but rule out vast mass ranges where dark matter particles might exist. These new calibrations increase that sensitivity even further.

One calibration technique used neutrons as stand-ins for dark matter particles. Bouncing neutrons off the xenon atoms allows scientists to quantify how the LUX detector responds to the recoiling process.

“It is like a giant game of pool with a neutron as the cue ball and the xenon atoms as the stripes and solids,” Gaitskell said. “We can track the neutron to deduce the details of the xenon recoil, and calibrate the response of LUX better than anything previously possible.”

The nature of the interaction between neutrons and xenon atoms is thought to be very similar to the interaction between dark matter and xenon. “It’s just that dark matter particles interact very much more weakly—about a million-million-million-million times more weakly,” Gaitskell said.

The neutron experiments help to calibrate the detector for interactions with the xenon nucleus. But LUX scientists have also calibrated the detector’s response to the deposition of small amounts of energy by struck atomic electrons. That’s done by injecting tritiated methane—a radioactive gas—into the detector.

“In a typical science run, most of what LUX sees are background electron recoil events,” said Carter Hall a University of Maryland professor. “Tritiated methane is a convenient source of similar events, and we’ve now studied hundreds of thousands of its decays in LUX. This gives us confidence that we won’t mistake these garden-variety events for dark matter.”

Another radioactive gas, krypton, was injected to help scientists distinguish between signals produced by ambient radioactivity and a potential dark matter signal.

“The krypton mixes uniformly in the liquid xenon and emits radiation with a known, specific energy, but then quickly decays away to a stable, non-radioactive form,” said Dan McKinsey, a UC Berkeley physics professor and co-spokesperson for LUX who is also an affiliate with Berkeley Lab. By precisely measuring the light and charge produced by this interaction, researchers can effectively filter out background events from their search.

“And so the search continues,” McKinsey said. “LUX is once again in dark matter detection mode at Sanford Lab. The latest run began in late 2014 and is expected to continue until June 2016. This run will represent an increase in exposure of more than four times compared to our previous 2013 run. We will be very excited to see if any dark matter particles have shown themselves in the new data.”

A version of this release and additional materials are available on the Sanford Lab site at http://sanfordlab.org/news/press-releases.


About Computing Sciences at Berkeley Lab

The Lawrence Berkeley National Laboratory (Berkeley Lab) Computing Sciences organization provides the computing and networking resources and expertise critical to advancing the Department of Energy's research missions: developing new energy sources, improving energy efficiency, developing new materials and increasing our understanding of ourselves, our world and our universe.

ESnet, the Energy Sciences Network, provides the high-bandwidth, reliable connections that link scientists at 40 DOE research sites to each other and to experimental facilities and supercomputing centers around the country. The National Energy Research Scientific Computing Center (NERSC) powers the discoveries of 6,000 scientists at national laboratories and universities, including those at Berkeley Lab's Computational Research Division (CRD). CRD conducts research and development in mathematical modeling and simulation, algorithm design, data storage, management and analysis, computer system architecture and high-performance software implementation. NERSC and ESnet are DOE Office of Science User Facilities.

Lawrence Berkeley National Laboratory addresses the world's most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab's scientific expertise has been recognized with 13 Nobel prizes. The University of California manages Berkeley Lab for the DOE’s Office of Science.

DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.